ASCEND ANDROID

There was a very informative and lengthy discussion around 802.11ac technology, together with the lessons learned by Aruba in their testing to date. I wont cover all points here, but the headlines that stuck in my mind were:

A mentioned above, Aruba highlighted the ongoing issue with "sticky clients". These are clients that initially associate with an AP and then, despite better-choice APs being available, remain associated as the client moves away from it. The issue with this is that the client speed will drop as the signal level falls, so that it is transmitting at lower speeds and impacting the efficiency of other clients using that same AP. If  clients can be made to prefer (and roam to) a more local AP, that will facilitate a better link speed and WLAN efficieincy, together with all of the efficiency gains that this will bring.

Aruba have a patented technology, called ClientMatch which apparently looks at things from a client point of view and can steer clients to better-choice APs. This technology can apparently work for all types of (legacy) client, but works best on more recent types of client that support newer 802.11 features such as 802.11k/v.

Reading between the lines, I think it analyses signal quality and signal levels from clients (at the AP end of things), together with 802.11k/v information to make some decisions about how things are looking from a clients point of view. Then, somehow (presumably through band steering and ignoring probes etc. from clients below pre-defined signal thresholds) it steers them to a better AP.

We all know the types of information that are available to an AP from clients and the limited amounts of information that clients themselves will supply or act on. So, its hard to see what there is here to actually patent. Unless there is some type of agent installed on the client (which there isnt in this case), what other unknown (patentable) mechanism could possibly be at work here? Apart from some secret sauce decision making from the WLAN point of view, using known measurements and techniques, its hard to understand what can be so unique about this. To be honest, without more information, Im struggling with the concept of a unique offering here...

Early on in the proceedings, Aruba presented their new 11ac access points: the AP220. There are two models, one with internal and one with external antennas. The units they had on display at the event were very impressive looking. They looked relatively light-weight (judging by the way they were being handled) and they appeared pretty sleek, as they have now dispensed with the usual air-vents to meet the wipe down needs of the healthcare sector.

The AP has 2 Gigabit Ethernet ports to cater for the theoretical throughput speeds that can achieved by an AP with 2 radios (1 x 5GHz 11ac & and  1 x 2.4GHz 11n). I didnt quite get the information around the power requirements (i.e. 802.3af vs 802.3at), but looking at the datasheet, it looks like it can run in an Efficient Mode with an 802.3af POE port and full funtionality mode with an 802.3at POE port. The detail on how the 2 gigabit Ethernet ports will be used (i.e. load balancing or a true trunk) was also unclear (this is still TBA on the datasheet I am looking at...).

The guys from Aruba pointed out that the AP uses less power than other solutions which require a plug in module (i.e. Cisco). But, from what I see so far, both solutions require a full 3at POE port to operate with full functionality, so, I dont really see an advantage there..?

They also said that in their experience to date, you can pretty much do a one for one swap out of 11n APs for 11ac, as the general coverage patterns were broadly similar.

A Microsoft representative provided an excellent presentation around the Microsoft Lync product, which was fascinating for those of us (OK, maybe just me) who arent that familiar with Lync. He described the challenges of trying to prioritise the different traffic flows that originate from a Lync client.  

The Lync client itself may be a number of form factors (laptop, tablet, phone), which may be the source of data, voice or video traffic. Trying to configure the QOS requirements for just those traffic types is a challenge, but throw in the fact that there is signalling traffic, some traffic is encrypted and some protocols do not use well known port ranges, and you have a whole heap of trouble.

He then went on to describe how Aruba have become a certified Microsoft Lync partner, allowing them to have access to an API that is made available from a Lync server. Having access to the API means that the Aruba wireless LAN controller can exchange information and drill down in to the detail of each Lync session, allowing decisions (such as QOS prioritisation) to be made as required. Apparently, Aruba and Microsoft have invested a lot of time in testing this exchange of information across the API, which allows better decisions to be made by the wireless network and provides much richer information to be made available on the wireless management platform.

This foray in to the Lync API was described as Arubas move in the to brave new world of SDN: the application providing information for the network fabric to provision the resources required for an application. Exciting stuff!!! It certainly sounds like a good strategic move for both organisations. but I wonder if an open, standards-based API would be a better way to go long term (...imagine an unique API for every different application)? This (SDN) isnt an area of expertise for me, so please excuse any comments which seem mis-guided and please attribute them to my technical ignorance :)

Finally, I have to say thanks to Aruba, Microsoft and Gestalt IT for providing such open access to this event. The information presented was both valuable and fascinating. 

The event itself was very well organised (as you might expect from those Tech Field Day boys), with a great deal of both vendor material (from Aruba/Microsoft), together with the opportunity for some challenging questions from vendor-neutral folks as well. I think this open-forum approach really shows that Aruba is ready to listen, as well as very generously share, which really raises my opinion of them significantly (...not that it was low before, :) Ive had no previous dealings with Aruba) .

I believe that Aruba are also going to make some of the material available from the presentations, in the form of videos and some of the slide decks - I particularly look forward to the recommended Lync QOS settings that were shared :)  I also strongly recommend that you review some of the great material that Aruba have made available about 802.11ac and their products.

This has been another very interesting and exciting chapter in the unfolding 802.11ac - thanks to Aruba, Microsoft & Gestalt IT.